Recoring Dech Hatches, strong enough?

[Chaser]

Try two layers of 1208 instead of one of 1708. The 1208 takes bends and wets out better, a little easier to get it to lay down over the edge of the core. Use a finish router to round over the edge of the core and then run a nice fillet and the 1208 will lay right down.

I echo the comments on v bag as well. Makes a much better part and makes it easier.

I just redid the entire floor of my boat with 1/2" Divinicell, 1 layer 1708 on the bottom and 2 layers 1208 on the top, mostly all sections bagged. Strong as hell and very light.