Grinding away on this project, literally. The seat supports are in. Filling in the square floor hatch so a bigger floor hatch can be made later that conforms to the outline of the seats. You can see the new hatch outline on the floor in pencil. I decided to make the seat in the center a little bigger (than my blue-tape-on-the-floor version), that will give me enough room to put a subwoofer and less cramped when your walking towards the bow between the seats. Also, removing old bow eye. New rub rail sample vs. old rub rail, big difference. 50' rub rail in a roll. And a brass thru-hull transducer.
That's all. ...for today.
|
04-02-2015, 11:41 PM
Threaded Mode