76 23 restore

[martin]

I drew a rough sketch of what I wntd the console to look like.. Then took some scrap foam from the floor hatch cutout to shape.. It had glass on one side so it made it easy to shape. I gutted some foam out of the console ,pealed 2" off the foam cutout and inserted the foam. Used a string to draw my arch. Reshaped it, And then made alignment marks on the foam.. Pulled it back out and back buttered it with cabosil and glass resin then reinserted..I'll let it set up then cut out the whole top and build electronic box..with gutters and such..

[martin]

Still working on hatch .. I rough sanded and it now fits. Still need to fair it out then final sand it to receive primer...