Repairing a Console to Flush Mount

[gofastsandman]

Originally Posted by Capt Chuck

Construct an upside down cookie sheet out of 3/4" PVC BOARD. Size having overlap your outside console cutout.
Layout your electronics and cut out,
Sand and paint. Screw the final deal to the console opening sealed with sillacone . Then you can just pull put the entire package without climbing under the console to check wiring, repair etc. So much simpler. You can't seal starboard properly and it wharps.

He`s getting smarter by the day.

You can round over with a router and look stock.

Or end grain balsa, mat, 1708, sanding, fairing, fairing, and more fairing.