|
|
#7
03-25-2018, 11:41 AM
|
|||
|
|||
The transom and bracket I used 1708 bi- axle cloth and marine epoxy. The deck I used 2 layers of 10 oz cloth on both sides. All work was done with marine epoxy. I use system 3 two part primer and system 3 fairing compound. I also widened the gunnels on the back to 6”. I’ve gotten a lot of calls with excitement but no closers. I’ll try and post a few more pictures tonight.
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Threaded Mode