deadrise angle at each panel on each size - Classic SeaCraft Community

		Classic SeaCraft Community > Recovered Threads
deadrise angle at each panel on each size

04-05-2018, 04:53 PM

Bigshrimpin Bigshrimpin is offline

Senior Member

Join Date: Dec 2002

Location: Onset, MA

Posts: 2,712

Quote:

Originally Posted by Bigshrimpin

I've put an angle finder on my 23 and 25. The 23 is 20.5 and the 25 is 25.5. But how do you account for the vertical step when measuring the deadrise?

These measurements are only for the bottom v on each hull. This does NOT include 2nd or 3rd panels. Bottom V only.

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 03:46 AM.