1986 Tracker Seacraft 20 budget rebuild

[Jared]

The tank will sit on starboard bonded to 4” wide fiberglass slats instead of the original solid floor that was in there. Hoping this will let it breathe and not hold moisture and accelerate corrosion like the original foam did. Laid up a couple pieces of fiberglass that are 9 plies of 1208 biaxial for a finished thickness around .300” thick. Each layup will be cut into 4 ~28”ish by 4” slats. Pretty happy with the finish from making them on a waxed piece of melamine, although no one will see them anyway. Credit to mrobertson on these, it’s his idea I’m copying.