|
|
|
|
#1
11-06-2019, 05:22 PM
|
|||
|
|||
Like mentioned, normally the flared threw hull is in a piece of wood between the two. May have potter putty between the two or around the wood block.
__________________
Current SeaCraft projects: 68 27' SeaCraft Race boat 71 20' SeaCraft CC sf 73 23' SeaCraft CC sf 74 20' SeaCraft Sceptre 74 20' SeaCraft CC sf 
|
|
#2
11-11-2019, 09:28 AM
|
|||
|
|||
|
I do see a 4x4 plywood block up there as well. I don't use that space as a fishbox so draining to the bilge might not work for everyone. Think I will plumb a line back to where I can see it drain or plug it.
|
|
#3
11-11-2019, 11:17 AM
|
|||
|
|||
|
There was still some of the plywood was there, so I filled the void with 5200 and installed a larger cast bronze thru-hull fitting. I had to hone the inside of the fitting so a plug would seal up.
http://www.classicseacraft.com/commu...1&d=1573485386 http://www.classicseacraft.com/commu...1&d=1573485418
__________________
1975 SF18/ 2002 DF140 1972 15' MonArk/ 1972 Merc 50 http://i833.photobucket.com/albums/z...photos/SC3.jpg
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
