Few updates...started messing with some expoxy (transom was done in epoxy- this is our seam from poly to epoxy). It was a tough learning curve but wetting out the 1708 first makes all the difference.
Finished raising the stringers and tying into transom.
Cleaned up the bilge, patched/putty imperfections, added a couple layers of 1708 to the keel and one layer to cover everything. Much better now some of the old roven was looking pretty aged/dry.
Finished coring the hull sides to the transom. Divinycell all the way aft for thruhulls. Plan is to keep the balsa completely sealed.
|
07-10-2020, 12:20 AM
Threaded Mode