Prop for 23 SeaCraft with transom-mounted Merc 250 EFI

[rdoaner123]

Originally Posted by Bigshrimpin

I had a 25" engine on 25" transom. As mentioned above I ran a fixed jack plate (see picture) that raised the engine to 27" and put the cavitation plate about 2" up. It was dialed in pretty well. I could NOT run a mirage plus at that height.

Thanks Bigshrimpin (as well as all the others) for all of the advise, you have been incredibly helpful! Hopefully in a couple weeks I'll have it all dialed in and will report back to you guys.