|
|
|
|
#1
09-13-2021, 10:30 PM
|
|||
|
|||
Shearline after the shaping but before the blocking 
|
|
#2
09-13-2021, 10:31 PM
|
|||
|
|||
|
I cut the transom to the original crown but it seemed a little too aggressive like she was a Blackwell. I ended up taking out another inch of crown
|
|
#3
09-13-2021, 10:32 PM
|
|||
|
|||
|
The sole was glasses on the bottom and glassed to the hull sides as well as to cleats underneath. Then I began coring the hull sides with h80 1/2”.
|
|
#4
09-13-2021, 10:32 PM
|
|||
|
|||
|
So the sole is glassed to the hull sides and then the cored sides were glassed to the sole. Holy sh$t did she just get strong.
|
|
#5
09-13-2021, 10:33 PM
|
|||
|
|||
|
Easiest way to template “one off panels” it with door skin strips and a hot glue gun.
|
|
#6
09-13-2021, 10:33 PM
|
|||
|
|||
|
|
|
#7
09-13-2021, 10:34 PM
|
|||
|
|||
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
