![]() |
|
#1
|
|||
|
|||
![]()
It has been a while since I've updated. Been busy with work, bought another boat, parents sold their house, crazy times.
All divinycell hull coring is glassed over and done. Outside of transom is done. Stern vent holes closed. Front block for tow eye is 2" of Coosa and glassed in. Next is bottom pieces for fuel tank, insulate fwd fishbox, and running pipes for rigging, fuel lines, fishbox drain, etc. |
#2
|
|||
|
|||
![]()
Here is what I took out from where the tow eye was and the Coosa one I made.
|
#3
|
|||
|
|||
![]()
I'm about to dig into my bow eye! That's a lot of work on the hull sides, well done! I'm still jealous of your tent!
|
#4
|
|||
|
|||
![]()
Had to move the rig (and the tent too) because our house is sold.
Can see the transom progress. Think it ended up being 9 layers on the outside wrapped around the sides and bottom. Inside has 6 layers. Should be sealed and secure as that’s the only wood in the whole boat. |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|