Trim Tabs on a 20

[Scott]

Seafari
(and all other putting tabs on a 23)

Just wanted to let you know that I have been talking with Tab Man about the sizing of the tabs for the 23. Sent him a picture of the space available on the transom to mount the tabs and he agrees that either a 12 x 12 or the M-120(10x12) would work well and would be the most appropriate tabs given the variable degree deadrise on these boats..... Looks like I will go with the M-120!!! (like you said along time ago when we talked [img]images/icons/wink.gif[/img] )

Thanks Tab Man for your help…..That makes me alot happier with the smaller tab [img]images/icons/cool.gif[/img]

Scott

[SEAFARI]

Hi Scott,
I just got the M-80's this week for the
20'! I saw the 120's for $373 at Boat Fix.

chris [img]images/icons/smile.gif[/img]

[Scott]

Thanks Chris

That the lowest price I've seen for that tab,M-120. Thats lower than I've seen for the 12x12 tab (and those tabs dont include the rocker switch as standard equip.)

Thanks again for the info..
Scott

[barnacle]

Just to let you know I sell the M120 set for 365.00. I would upgrade to the rocker switche's. THe rocker style we sell for 56.00. I have been installing the Lenco's for 2 years now and we have not had a problem yet. And there so simple to install.

[Mark]

The 20's don't have a lot of excess room in them. Considering the absense of many Lenco complaints, the electric tabs that don't require a reservoir would seem to be advantagious from a space standpoint.

[barnacle]

Mark, your right. It is a very simple design that works without any problems. THe motors are mounted inside the cylinder. THe cylinder is like a screw jack. Like I said I have not had a problem with about 40 installs. Very easy and fast installs with no mess.

[Water Rat]

My installation definitely falls into the overkill
category. I installed (myself - not very difficult) a set of Kiekhafer (Mercury) model 280S
K-Planes. Dimensions are approx. 12-14" wide x
18-20" long. They fit perfectly on the outside
"step" of a 23' hull. Separate hydraulic pumps for each tab. Very strong, easily supports my weight. Also, change in ride and control I was
amazing - well worth the extra cost in my opinion.
If pictures of my installation would help anyone, let my know and I can e-mail.

[Reel Smoker]

Jason,In my opinion Bennet is the way to go with the rocker switch. Dont get the racing switch its not as good. I personally would'nt install Lencos. I've seen then break within months of installation and the noise are horrible, just my opinion.RS.

[Trayder]

Chris Please E-mail them to me, I will post them on this thread.

Tx Jason

[Water Rat]

Trayder:

Now that I offerred up pictures, of course I cannot find them, as yet anyway. I will forward
as soon as I find them or take new pics soon.

Thanks,
Chris