finished hatches for sale

[FAS]

Originally Posted by deepsushi

Can I suggest building a mold for an bow anchor hatch that would fit on the 23's? I would bet there would be some good interest for a hatch like this...

I would go for one too....

[shine]

hatches are listed here...


http://www.gulfstreamcomposites.com/category-s/124.htm

[shine]

There has been a lot of interest in the hatches, we will soon have a 20" square hatch to add, will have same gutter profile (match the other two)

Also, we are working on getting two new hatches (a rectangle and a square) that will be less finished, a little cheaper. Most guys end up painting these anyway. These new hatches will not have hardware, just the gutter flange and the hatch cover to go with it, so you can use your own choice of hinges and latches.

[dave s]

Hi Joel, my buddy and I are working on that 28' BHM that he ordered 3 hatches for; the unfinished hatches might work better, since we're painting anyway.
20" square hatches sound interesting.
Remind him to get the roll of 1700 also.
Thanks, Dave.

[shine]

the hatches are now listed at our store. Here is a link....

link removed, please call me if you want to order one. 772.633.7923 Joel

[jnamowitz]

I would definitely be interested in a bow anchor hatch, Like whats on the SeeVee. For installing these hatches, do you just cut the hole and then 5200 it in place?

[dave s]

Just got three of the large rectangular hatches for my buddy's 28' BHM project. They are well made and gel coated, and come with the latch, hinges, and gasket.
Joel, regarding the hinges, do you suggest cutting out the deck below the loc nuts, if you need to access them?

Also I'd like some more sizes so I don't have to make custom hatches for my projects.

[shine]

I would either cut so there is access, or pull the hinges off and later use screws.

The shop is now making a mold for a smaller square hatch.

I have another guy who is working on hatches that will be a little less finished. They will be sold without non-skid or any hardware. Hopefully these will be avaluable in the next feweek weeks.

[martin]

Originally Posted by shine

I would either cut so there is access, or pull the hinges off and later use screws.

The shop is now making a mold for a smaller square hatch.

I have another guy who is working on hatches that will be a little less finished. They will be sold without non-skid or any hardware. Hopefully these will be avaluable in the next feweek weeks.

Shine Please let me know asap as to when these hatches will be done. I will need some hatches for the transom and 5 small square.BTW what is the size of the square hatch?.

[shine]

Originally Posted by martin

Shine Please let me know asap as to when these hatches will be done. I will need some hatches for the transom and 5 small square.BTW what is the size of the square hatch?.

will do!