![]() |
#1
|
|||
|
|||
![]()
I know similar questions have been asked in the past but is it feasible to remove the liner and replace all the old core and do repairs from both sides. The cap and liner are all one piece on the SF's correct. Any help would be appreciated, thanks.
|
#2
|
|||
|
|||
![]()
I dont know if I explained what I'm trying to do correctly or not. Basically if I take off the rub rail and unscrew the cap from the hull, can I pull out the sides and the floor and the front casting deck all in one big piece for repairs.
|
#3
|
|||
|
|||
![]()
Not wihtout cutting scroll down the page and check out Stricks phic's he removed his liner
__________________
Under the knife 1969 20 CC I/O |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|