|
|
#1
04-30-2010, 12:44 AM
|
|||
|
|||
Macerator install - 23' Tsunami
I want to install a macerator for a fish box to grind up all the fish scales and slime I occasionally get.
The fish box will be in the large floor hatch I have between the helm and passenger seat. Currently, I use a large, Rubbermaid so the guts won't go into the bilge... Questions: - Anyone have a preference for a macerator for this job ? - It would be an easier install if I mount the macerator on the inner transom - w/ about 8' of hose from the fishbox outlet to the macerator intake. Is this a problem ? I would assume that the closer the macerator to 'the guts' the better, but that is a tougher install.. Anyone have any insight ? Thx. 
|
|
#2
04-30-2010, 07:21 AM
|
|||
|
|||
|
Re: Macerator install - 23' Tsunami
Macerator on the transom will work. It needs to be mounted low and then pump the results overboard above the waterline like a bilge pump. You need to use the full 1.5" hose to the pump with no reducers.
25 years ago, I had a 25' Robalo with an inline macerator mounted off the fish box. It worked great. As much as I dislike shopping there, West Marine has a 12v macerator pump on sale right now-$55. Shurflo Macerator Pump
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes. Fr. Frank says: Jesus liked fishing, too. He even walked on water to get to the boat! Currently without a SeaCraft  (2) Pompano 12' fishing kayaks '73 Cobia 18' prototype "Casting Skiff", 70hp Mercury
|
|
#3
05-01-2010, 05:21 PM
|
|||
|
|||
|
Re: Macerator install - 23' Tsunami
I have a jabsco macerator I just plucked of of Ebay new in the box. I got it for a spare but will pass it along for the same that I paid. New at BOW they are $150, I think I paid $90?
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
