|
|
#1
12-13-2010, 10:59 AM
|
|||
|
|||
1972 23' center console with new bracket, project
1972 Seacraft 23' center console hull. Bought as a project 5ys ago. Have not had the time to finish. Boat has been shrunk wrapped while in my possesion. Boat has a new Hermco fiberglass bracket which cost $3500 http://www.hermco.net/default.html. Bracket is set up for twin engines, currently drilled for single. Set up for 2 25" engines or single 30" engine. Fuel tank is new, capacity is 160 gallons. Aft baitwell was removed to accomodate larger tank. Aft deck has been customized for tank install, hatch made to fit tank, forward hatch recored and stringers were strengthened to professional attach bracket. Has damage to port strd bow rail. Have 2 consoles for boat one large with forward door or one with forward bench. T top included, but has some damage. Boat was from florida, during a storm the boat floated from lift and ended up against a bulkhead, boat did not sink. $3,500 B/O Call Matt for more details (508)280-3866
See Craigslist Ad for Photos http://capecod.craigslist.org/boa/2110094633.html 
|
|
#2
12-13-2010, 02:02 PM
|
|||
|
|||
|
Re: 1972 23' center console with new bracket, project
Hermco twin bracket new is $2695
http://www.hermco.net/pricing.html
|
|
#3
12-13-2010, 04:53 PM
|
|||
|
|||
|
Re: 1972 23' center console with new bracket, project
Ill offer $2000 for the bracket, and Ill remove it.
__________________
Patrick from WAY out on cape cod. 1973 23foot Center console, Birdsall Ttop, Hermco Bracket... in progress
|
|
#4
12-13-2010, 06:26 PM
|
|||
|
|||
|
Re: 1972 23' center console with new bracket, project
thanks for the update on the pricing of the bracket and I will change the ad, last time i checked a couple of months ago it was $3500...
|
|
#5
12-13-2010, 06:30 PM
|
|||
|
|||
|
Re: 1972 23' center console with new bracket, project
Give Matt a call at 508-280-3866 to discuss selling the bracket
|
|
#7
12-25-2010, 02:14 PM
|
|||
|
|||
|
Re: 1972 23' center console with new bracket, project
I've seen this boat. The bow section is very repairable. The deck cap is going to be the most labor intensive part. I think there were also a few soft spots in the floor. Transom/splashwell bulkhead area will need work too. New Fuel Tank, bracket, and trailer are worth the asking price, but it's a HUGE project.
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
