![]() |
#1
|
|||
|
|||
![]()
Hi i just pulled this unit out of hibernation was going to try to convert hundred of numbers i have from td -lat lon one problem... This unit will not stay on.. I read the instructions and it says nothing about turning off on it own... Do i need to keep her on the battery fora while to charge the internal battery.. Or do i just need to throw away and get a new one... This was fairly new when i got it.. Before it was shelved for about 4 years thanks for your help guys and gals
|
#2
|
|||
|
|||
![]()
you need to replace the internal battery
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes. Fr. Frank says: Jesus liked fishing, too. He even walked on water to get to the boat! Currently without a SeaCraft ![]() (2) Pompano 12' fishing kayaks '73 Cobia 18' prototype "Casting Skiff", 70hp Mercury |
#3
|
|||
|
|||
![]()
Hey Do you know where I can get one and solder it in Thanks Martin
|
#4
|
|||
|
|||
![]()
Thanks found some ...will check local radio shack
|
#5
|
|||
|
|||
![]()
Thanks For the help... Got a battery at battery source. Solder it in and Blammo ... Works like Brand New... Thanks again
|
#6
|
|||
|
|||
![]()
Okay I have a lot of numbers tds ,I would like to convert to LAt Lons My master chain is7980 Is there offsets I need to use to get a some what accurate pos.... Right now I am about 1/4 mile off Without any offsets Would like to be about 300 feet.. is it possible?
|
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|