Vinyl Gunnel Trim

[Capt Chuck]

I didn't get any hits on this post so I'm bringing it up again in hopes of some answers [img]images/icons/smile.gif[/img]

[Capt Chuck]

Bump

[Rufridr069]

Is it the U channel type or an actual strip?

[Capt Chuck]

Hi Rich

It is a flat strip made of vinyl, not wood, plastic or metal. There is no lip or U to it. Originally it appeared to be adhered with double face tape and small s/s screws every few inches. I have not seen any other SeaCrafts where this material was used. I don't think it was an after-market deal

BTW: Did you check on the availability of the mono and monel line

[Rufridr069]

check you PM's

[Michael Vezzosi]

Captain Chuck, my '79 MA had the same material and needs to be replaced. Carried that same piece in back of my truck for two years now- haven't seen anything like it. Saw a picture of a sweet idea while looking at a post regarding "speaker location". Someone on this site ran what appears to be either stainless or polished aluminum rubrail inside in same location-looks sweet. Price between two is not too bad, my question is; Is the hand rail on my SC stainless in need of polishing, or is it possibly aluminum? Thanks, Vezo.

[Capt Chuck]

Hi LT Vezo

had the same material and needs to be replaced. Carried that same piece in back of my truck for two years now

Do you still have it and if so, will you part with it

Someone on this site ran what appears to be either stainless or polished aluminum rubrail inside in same location-looks sweet

That was mine. I think you asked me about it. I explained that it was not stainless rail because I felt it would get hot or rough against the knees.

I painted it with a couple of coats of Signature finish. That's why I need more of that cool stuff too continue the same across the transom

Is the hand rail on my SC stainless in need of polishing, or is it possibly aluminum?

I would think that it would not be difficult to distinguish between the two metals