|
|
|
|
#1
10-21-2004, 07:43 AM
|
|||
|
|||
Re: Transom Angle?
Chuck, I looked at the Seamark bracket but 3K is a little much. I went to Dusky and they have one which looks the same for under 2k and I can get it in any color(s) I want. Its either that or a Stainless Marine bracket.
__________________
Wasn't there, ya didn't see me, ya can't prove it! [img]/images/graemlins/cool.gif[/img] 
|
|
#2
10-21-2004, 08:40 AM
|
|||
|
|||
|
Re: Transom Angle?
HA TEAMBRATPACK
You better check what Dusky and find out what them make them out of, their old ones were made of a cheep wood with lamination on both sides that’s not the same as all glass with Potter’s bracket kind of you get what you pay for. I saw one of Dusky’s brackets that had a crack down the seem and I know that the lamination had to be gone. FellowShip [img]/images/graemlins/confused.gif[/img]
|
|
#3
10-21-2004, 10:23 AM
|
||||
|
||||
|
Re: Transom Angle?
Rich
Painting the bracket is no problem. I did mine in less than an hour [img]/images/graemlins/wink.gif[/img] If your going with twins you really need to go look at Bill Porter's (generaider) set up. He has twin 135hp on a Potter Bracket. He lives in Ft Lauderdale. When Mark and I took a ride we were quite impressed [img]/images/graemlins/smile.gif[/img]
__________________
   1978 23' Superfish/Potter Bracket 250HP -------- as "Americans" you have the right to ...... "LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck
|
 |
|
|
Hybrid Mode
