"THE VORTEX"

[eggsuckindog]

JUst got my material from HD, all I need is the cups now but its very simple, the # 436 005 makes it very simple to find the correct part. I had to get O rings 7/8 X 11/16 X 3/32 # 13's but they look like they will do fine. Film at 11

[FELLOW-SHIP]

DON’T FOR GET THE BEER.

FellowShip

_______________________________________________

My motto: Just for the Grins

[Blue197320]

guys,
i am having a VERY hard time trying to figure this thing out. i think i need some better pics or something. would some one be kind enough to help me out with this. thank you
-Evan

[abl1111]

Drink a beer and re-read...slowly.

[Blue197320]

i think i might have had too many beers last nite. ill try again today..

[FELLOW-SHIP]

On page 2 of this thread is some pictures. You are looking at top row first item is a plastic cup, the second item is the cut out of the plastic cup that looks like a golf ball on the tee, then there is the sprinkler fitting female on the one side and male thread on the other. That’s the piece you cut half the female side off and drill two holes for the pull. And then the o ring. On the bottom row is two completed VORTEX’S ready to go. You must have been drinking one of those imported beers and that’s where you messed up.

FellowShip

_______________________________________________

My motto: Just for the Grins

[Blue197320]

well i got my VORTEX completed. i think... will be testing on saturday if i have a tow vehicle available to me. will let you all know how well they work in a 20
-evan

[eggsuckindog]

I got mine done, 1 worked pretty good the other needs some work as it wouldn't close. I will go back a re-work the flap as this must have been OPERATOR ERROR

[Blue197320]

i tried my vortex's on sunday. they work pretty good. i also need to try a different thickness for the flap. they still let in some water when u stand in the back of the boat..