|
|
|
|
#1
05-03-2009, 11:07 AM
|
|||
|
|||
Re: Before and After
WOW, nice job!!! A couple of questions for you. Who did the work, console and t top? Are you selling the old wheel?
I just bought not really cup holders but beverage (can/bottle) holders from a Jeep place online. They are nylon insulated with velcro straps. The Jeep people use them to strap to the roll bars, I use them to strap to my T Top - they were like 2 for $12. 
|
|
#2
05-03-2009, 05:18 PM
|
|||
|
|||
|
Re: Before and After
The T top was made by Miller Marine in Northeast Maryland.
The Console I did myself. The boat budget is thin so I saved by doing it myself. I'm not the craftsman you see at some of the other posts but the price was right. It took so long I missed the best part of the local catch and release season. I had the electronics in the ovehead electronics box for a couple years, but after seeing the screens on all the new boats right in front of you I decided to change the location to right in the line of sight. I proved again that I cannot spray paint so I'm saving up to have a professional painter make it look good close up. The steering wheel is for sale. Make an offer.
__________________
73 23 SF 2004 200 HP Yami OX66 Best boat I owned! 2002 29 Seavee twin 200 yami's
|
|
#3
05-03-2009, 09:38 PM
|
|||
|
|||
|
Re: Before and After
I had alot of trouble finding one but I did find a starboard cup drink holder that would work perfect in the middle for the Capt- will hold insulated cups and big mugs. We are only good for 4 beers or so and no other drink holder I could find would hold insulated stuff. I could track it down as they are made local down here, I even had to pay retail - gasp.
__________________
Any way you measure it - dumbass is expensive
|
 |
|
|
Hybrid Mode
