anchor stowage ideas for 23 cc

[shine]

Originally Posted by GodsReel

thanks for feedback , there really isn't a lot of room, have you sourced a good hanging system or are you gonna build it.

going to have to build it. Picking up an anchor today so that I can make it to fit it. I have to position the anchor in there to see how far up the "hooks" have to be. The anchors are about 24", plus room for chain/rode - its going to be tight! But its worth it, i do not want a anchor mounted on my deck.

I will try to remember to post some pictures of what I figure out

[GodsReel]

i would love to see what you come up with.

[shine]

here is a picture of what I have come up with. In the picture they are upside down, the flange part gets epoxied to the underside of the deck/cap. Just enough room to still mount a pull up cleat on the bow and give a few inches of space at the bottom. I will probably still have a tight fit for the anchor rode, may have to put some of it in the storage compartment below.

http://gallery.bateau2.com/albums/us..._shine_495.jpg