![]() |
|
#1
|
|||
|
|||
![]()
Jorge,
Mine came from the factory with a big Rule pump strapped to the center stringer with an aluminum U-shaped bracket with a strip of rubber glued to inside of bracket. It was located on stbd side all the way aft against transom. Still mounted the same way 40 years later!
__________________
'72 SeaFari/150E-Tec/Hermco Bracket, owned since 1975. http://i188.photobucket.com/albums/z...Part2019-1.jpg |
#2
|
|||
|
|||
![]()
like the idea of the bracket but mine has no center stringer but maybe possible attached to the transom with pleanty of 4200 for the sscrews
|
![]() |
|
|