Custom 25 CC - Shine

[shine]

Looking really good, shine.

Thanks!

Will you be painting or go clear to show construction and grain. What wood(s) did you use?

the wood is a core, the hull is a composite sandwich. The skins are biaxial fiberglass set in epoxy resin. The outside glass skin is too thick to be clear coated, in some places the outside skin is near 1/4" thick (overlaps).

It is certainly possible to have a clear finished hull, but I would probably us a second (thin) veneer vacuum bagged over the glass to achieve the look.

Some serious dead-rise there. What is the deadrise,

Deadrise is 24 degrees, but there is a keel pad and extra wide chines that average that down.

and can you take a shot from the aft end showing DR and the strakes?

I dont have a rendering exactly of that angle, but there are a ton of pictures here....

http://gulfstreamcomposites.forumoti...5-build-thread

[McGillicuddy]

Thanks Joel,
Appreciate the GSC link. Good stuff. Excellent work. Great pics they're really educational. That Woodford Reserve resin looks nice
I'll be watching more closely.
Cheers,
McGill

[shine]

Port hullside got one layer of glass today. *First picture is after rolling on epoxy on the wood, second if after one layer of 12 oz biax. *

That Woodford Reserve resin looks nice

It sure is ! It's compatible with everything

[shine]

have not updated this one in a little while, Im into the most fun part of all right now.... Fairing !




[img]http://i86.servimg.com/u/f86/19/19/83/70/20160312.jpg[/img

[FAS]

Very nice, and very special..We can appreciate the labor involved.keep updates