|
|
|
|
#1
09-13-2021, 10:22 PM
|
|||
|
|||
A couple people started this as a “classic seacraft” project so it saved me some money and sawzall blades 
|
|
#2
09-13-2021, 10:25 PM
|
|||
|
|||
|
The hull is braced to prevent twisting and the stringers were removed
|
|
#3
09-13-2021, 10:28 PM
|
|||
|
|||
|
The hull was ground and sanded with 60 grit, stringers were built from h60 2” foam with 2 layers of 1708, stringers were triple tabbed to the hull (one of which was a full wrap), coosa 20 was glasses in for fuel tank and bilge bucket shelf, sealed compartments were foamed.
|
|
#4
09-13-2021, 10:29 PM
|
|||
|
|||
|
I needed to feel some progress to I cut the low density 1/2” coosa that would become the sole.
|
|
#5
09-13-2021, 10:29 PM
|
|||
|
|||
|
The bilge and the forward fish box were sprayed with raptor liner. Reduces fairing and is almost bulletproof
|
|
#6
09-13-2021, 10:30 PM
|
|||
|
|||
|
Battening to draw out the new shearline and give her some curves
|
|
#7
09-13-2021, 10:30 PM
|
|||
|
|||
|
Shearline after the shaping but before the blocking
|
 |
|
|
Hybrid Mode
