I'm sure if they ask them nicely...

Two a holes from NY knowingly flew into PBIA wif de virus.

No Viking hat?

Can't call it the Wuhan virus anymore...
Seems that's now wasist.
Wonder how the folks in Lyme Ct feel about this.

WUHAN MARINE, "watch how we make it WUHAN!"

They should have called it Kung Flu.

Wuhan Wutang

The PB boat show was postponed not canceled.

Wuhan!

LOL you guys are having way too much fun over there...never seen Cap Chuck ready to give out preliminary Gucci stamps either but this unique build is certainly heading that way...on those under gunnel supports/rod racks you put a pvc sleeve is there... any issue painting over the pvc? Great work as usual Dirt

strick

I just take a lil drum sander with 150 grit and hit it, prime n paint like normal. Done a bunch with pvc, and with glass pipe. pvc holds paint just fine after an epoxy primer.

Got it thank you sir...I forgot about the awlgrip primer..will stick to anything..

Strick

Unreal. I want to throw my boat in the dumpster and take up knitting instead after looking at this project. You are a master

I have to strive to be, i do it for a living!

The devil is in the details! The little things always take the most time, well besides fairing...

Yes i was in a hurry and only measured once before cutting on these as u can see, DOH!

https://live.staticflickr.com/65535/...bf147a2f_c.jpgUntitled by dirtwheelsfl, on Flickr

https://live.staticflickr.com/65535/...c293e46c_c.jpgUntitled by dirtwheelsfl, on Flickrhttps://live.staticflickr.com/65535/...d17e7d0a_c.jpgUntitled by dirtwheelsfl, on Flickr

https://live.staticflickr.com/65535/...326e0f73_c.jpgUntitled by dirtwheelsfl, on Flickr

Quickie gutter material

https://live.staticflickr.com/65535/...b00760f5_c.jpgUntitled by dirtwheelsfl, on Flickr

Moved the miter saw outside for these cuts. The whole aft edge got core removed and solid glass put in for hinge hardware. The corners got filled with epoxy (red stuff) and rounded over before tabbing.

https://live.staticflickr.com/65535/...d500e63c_c.jpgUntitled by dirtwheelsfl, on Flickr

https://live.staticflickr.com/65535/...2dfdb966_c.jpgUntitled by dirtwheelsfl, on Flickr

This is a piece of hollow-back rubrail with packing tape under it mushed in some epoxy to form a round profile. It will keep that edge from getting beat up. The rest of bulkhead gets core taken out of the edges, epoxy filled then glassed too... Fasteners got a full inch depth filled.

https://live.staticflickr.com/65535/...e1b19911_c.jpgUntitled by dirtwheelsfl, on Flickr

https://live.staticflickr.com/65535/...5236e55c_c.jpgUntitled by dirtwheelsfl, on Flickr