Re: mercury poppet
 

i really hope this fixes the problem im having. i have 5 mercury dealers in my area so hopefully i can pick up all the gaskets tomorrow.

Re: mercury poppet
 

It will!! You defintely have mis-matched plates on there now . . . It's gonna be a smokin fast lil' boat with that motor ... good on fuel too. Which carbs are you running? Also make sure you yank the spark advance/idle stabilizer module and oil injection if they're still on.

Re: mercury poppet
 

i think all that electronic stuff is off already. carbs ill get back to u this afternoon when i get off of work

Re: mercury poppet
 

so i get the gaskets and get to the shop and the guy says he will pull the power head but thats it because that exhaust plate off the 2.4 wont fit in that 2.5 leg. if i want to change that exhaust plate i need to pull the whole engine off the boat next week and wait for him to have some free time to do it!? what the hell is this!? so i might be gettin an engine lift tomorrow and tryin to do the whole thing on saturday. can this be done in 1 day??

Re: mercury poppet
 

If there are no stuck nuts on the power head, yes it can be done in a day. If when the last time the power head was off and every bolt was greased, it should be a cake walk.
Just make sure you have the Merc fly wheel lifting ring handy.
http://i7.photobucket.com/albums/y27...Picture099.jpg
See ya, Ken

Re: mercury poppet
 

the motor was assembled in november/december '06. the guy who did it has the lifting eye so i think im gonna go borrow it today and start tearin into it tonight.

Re: mercury poppet
 

http://www.wellcraftv20.com/gallery/...7/P0000026.jpg

I just took my 2.4L plate over to my merc graveyard where the 2.5L leg lives to be 100% sure that my memory was correct.

Looks like there's one more step if you want to use the 2.4L plates.

Or you could stay just use the top 2.5L plate which would be a lot less work . . . but you have to go back to the store to get right gasket.

Re: mercury poppet
 

so if i use the 2.5 adapter plate will those exhaust holes i cut still be functional?? i got everything apart and am stuck now..