Originally Posted by McGillicuddy (Post 206142)

3/4" square bars of aluminum or stainless (could use tubing if you prefer); cut the ends at appropriate angles weld on 3/16" flange plates w/countersunk mounting holes and screw in place. Give bar a little quarter round to match the soft curves of the 21 and your done... :cool:

Originally Posted by Blue_Heron (Post 206157)

Terry,
I made mine out of 304 stainless sheet and bent it on a sheet metal brake we've got at work. It's very stiff, no worries about it letting go if someone grabs hold

http://i655.photobucket.com/albums/u...t/IMG_4241.jpg

I have plenty of the material left if you want me to throw a couple together for you, no charge. I'd need you to send me a wood template that's the right length and has the correct angle cut on each end. Or I could just bend some angle stock and you can cut it to length and bend the ears on the ends. Call or PM me if you're interested.
Dave

Originally Posted by strick (Post 206165)

That would be an offer I could not refuse :)

strick