Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)
-   -   A few questions (http://www.classicseacraft.com/community/showthread.php?t=28016)

DonV 06-07-2016 03:27 PM

Wow a twenty inch - six footer is a strange SeaCraft in my book!!! One of those boats for midgets, whoops I've gotta be more PC, small people!! Sorry T-3, was too easy to let pass! :)

Terry England 06-07-2016 04:59 PM

Feet, then Inches
 
Quote:

Originally Posted by DonV (Post 244388)
Wow a twenty inch - six footer is a strange SeaCraft in my book!!! One of those boats for midgets, whoops I've gotta be more PC, small people!! Sorry T-3, was too easy to let pass! :)

'Twas a typo. I'll blame the fiberglass shard in my typing finger. Feet first, then inches - any contractor knows that, even one with the oldest GC license in Pinellas County (C-196).

FLexpat 06-07-2016 06:07 PM

T-3:
Gimbal bearings?
Transmissions/gearboxes?
18'?

contemplate phosphorescent plankton - works at night too.

Finnatic: I would do 31" and use a 30" shaft

Finnatic 06-08-2016 07:25 PM

Quote:

Originally Posted by Terry England (Post 244383)
T-3 is very old and forgetful. I started taking Prevagen, you know the stuff made with jellyfish - Now all it think about is Plankton!!
My apologies T-1
Finnatic says he has a 20"-6', maybe it's really one of the of the last 21's. (Well, other than that one we know is in the basement of the CIA)

Okay I stand corrected it's a 1974 20' CC. A case of CRS can't remember sh!t. Sorry about that.

Finnatic 06-08-2016 07:36 PM

Quote:

Originally Posted by NoBones (Post 244344)
Jiminy Christmas Marshtackie......:rolleyes:

Did you start early today with the buy one get one..:eek:

AKA: BOGO

I know Walgreens was running a special, but jeesh...:D

You made me half looped just tryin' to read your response..;)

I would like to power with a 150 4 stroke. I never had the boat in the water so can only guess at the water line from the old bottom paint line. I will use the boat in Long Island sound, these boats are great for the wash board conditions we frequently see. I run twin 150's on my 2360 I like to get to my fishing grounds asap weather permitting. It's my understanding this hull design was used when Sailfish boats came to be. My 2360 Sailfish hull looks very similar to my Sea Craft hull.

Terry England 06-08-2016 09:00 PM

Quote:

Originally Posted by Finnatic (Post 244440)
I would like to power with a 150 4 stroke. I never had the boat in the water so can only guess at the water line from the old bottom paint line. I will use the boat in Long Island sound, these boats are great for the wash board conditions we frequently see. I run twin 150's on my 2360 I like to get to my fishing grounds asap weather permitting. It's my understanding this hull design was used when Sailfish boats came to be. My 2360 Sailfish hull looks very similar to my Sea Craft hull.

Finatic,
Based on that data Captain, I would concour with No Bones post #2 (if you're not putting a bait well behind the seat) Good luck - send pictures.

Bushwacker 06-08-2016 11:47 PM

Quote:

Originally Posted by Finnatic (Post 244440)
I would like to power with a 150 4 stroke. . .

These boats were designed for motors of 300 lbs or less, so if you're gonna hang almost 500 lbs on the transom, you're gonna have to move a lot of weight forward to keep from screwing up the CG and hurting the ride & low speed planing capability! It would be easier to balance with a DI 2-stroke, which will also have more mid-range torque for getting on plane with a heavy load.

Finnatic 06-09-2016 07:50 PM

Quote:

Originally Posted by Bushwacker (Post 244444)
These boats were designed for motors of 300 lbs or less, so if you're gonna hang almost 500 lbs on the transom, you're gonna have to move a lot of weight forward to keep from screwing up the CG and hurting the ride & low speed planing capability! It would be easier to balance with a DI 2-stroke, which will also have more mid-range torque for getting on plane with a heavy load.

I was not sure about the weight. I don't want to start shifting weight or change the performance of the boat. I'll keep the 300 lbs in mind when looking for power. Thank's

Terry England 06-09-2016 08:38 PM

Sailfish
 
Quote:

Originally Posted by Finnatic (Post 244440)
....... My 2360 Sailfish hull looks very similar to my Sea Craft hull.

Finnatic,
Snookerd once told me that it was actually a 21 Sailfish that beat the 21 Alim in the CIA sea trials for the Bay of Pigs invasion boat in 1961. Carl bought one and copied the hull shape of the VDH hull and went on to win some boat races or something and the rest is history.
Anyway, I understand Snookerd is saving up his weekly allowance for a Sailfish because he wants "an original" to bolt that new 300 Zukie to! Then he'll have a great Sarasota dive boat and he'll be set for life. One needs goals in life.

gofastsandman 06-09-2016 08:39 PM

Quote:

Originally Posted by Islandtrader (Post 244381)
Do you have something against the "Original" 21':eek:

I think I see a vacation in SE Asia in your future.

Shipping containers full of contraband hulls.

Cheers,
GFS


All times are GMT -4. The time now is 06:19 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft