Front
 

Front prime session

300 Suzuki
 

Just mounted up four stroke 300
Sweet!
Needed:

prop not sure which to got with def 4blade
gauge multi smis
Steering setup seastar Hc5345
let me know if u got any of this stuff
Frank 561-756-0638

Df300
 

Just mounted today can't wait

Color on sides
 

Again painted sides

Sweet rig!

Needs more rod holders! ;)

Looking great!

Tank is in
 

Acid etch primed tank three coats of coal tarepoxy
PVC strips 5200 solid to tank set in light globs before final set in then lag bolted to stringers cap 5200 on

Floors raptor liner
 

Epoxy primed 3 coats then 2 coats raptor liner oh and top epoxy primed for 5 time and back to sanding but coming along also installed some through hula

Bottom bitch
 

4 gal airplane striper scrapers two weeks upsidown painting scraping and fairing upside down fffff why didn't I flip it from beginning. I took off 3 layers of black bottom paint red paint primer two layered of blue bottom and polyurethane blue And gel coat off bottom now has 3 layers mopoxye primer and 3 4 layers mothane

Pics from back
 

In stalled some through hulls and sanding

Rigging time
 

Finally after two and a half years she is in color

Thanks for the support
 

Well needed after this sanding fest

Looks great

That thing is badass!

Can't wait to see it in the water!

Top pic
 

hopefully get her started this week

Transom pic
 

Started bolting stuff on today

Final touches
 

Decided to paint motor to match

Console
 

Got her wired with exceptions of a few things

All in
 

Stainless in and 90% hardware rub rail 360 also

Looking good! When you splashing her?

Waterbound
 

Finally got her in the water and can't be happier
A little Over propped seemed laggy and only would turn up 14.5" 23 pitch three blade
5800rpm need left hand Suzuki 18 pitch thinking

Looks incredible! Frank you know at some point you've got to really show this thing, it has so many unique things to it from the t top, to the cut sheer, The cap is different as well. Did you fill in the recessed hand rails or did you start with a scepter.? Either way it looks like you've really done a ton of work.

Very nice Frank, looks perfect! Oh yeah, don't forget to get your daughter's pink shoe. :)

Start photo
 

Thanks for comments guys will be out on water for u to see
Started out with a center console but pretty much started over
But I took features from my 21 seacraft after fishing it and made this one the way I wanted. No wood all coosa and nidacore

Side profile
 

Here is better one with sheer line

Side pic water
 

Here she is wet this is my dad and two girls, he beat leukemia over course of me making this boat never thought he would get to see it finished but thanks to his determination and stem cell transplants he still will fish many more years. Fcuk u cancer!

Frank one great job looks fantastic

Fine tuning
 

Jacked up motor all the way 7" above keel hope I get some more rs out and get closer to 60mph

Prop test
 

If it still isn't high enough jack plate time I guess

Sandbar
 

Lack of pics been fishing sorry😁

Wahooooo!
 

Breakin

Nice!

Not FAKE NEWS !!
Nice work guys. I like Wahoo Sushi better than tuna

Mahi majic
 

It's official boat is fish magnet!

Sweet.
Where did you get those big honkin scuppers?

Scuppers
 

Scuppers are from gemlux website

Love their stuff.
Scored a sweet Gem Rybo style wheel for 60 clams for the race boat.