Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   General (http://www.classicseacraft.com/community/forumdisplay.php?f=4)
-   -   Factory Installed Bracket? (http://www.classicseacraft.com/community/showthread.php?t=14609)

Mooncusser 08-13-2004 01:54 PM

Factory Installed Bracket?
 
http://newimages.yachtworld.com/1/2/6/7/4/1267478_2.jpg

The broker on this claims this bracket was factory installed. It's on a 1987 which I assume is a CSY hull? Has anyone ever seen this? it looked like an I/O conversion to me.

PipeDreamsMarine 08-13-2004 03:12 PM

Re: Factory Installed Bracket?
 
I/O conversion... and a Mako console too

gw204 08-13-2004 04:01 PM

Re: Factory Installed Bracket?
 
Cute.....

Nice half skeg on the motor.

Looks to me like the tabs are not lined up with the bottom of the hull. I'm aware of the variable deadrise thing but those tabs are almost parallel to the ground.

What kind of rollers are those right above the fenders? Are they some new type of poly? [img]/images/graemlins/laugh.gif[/img]

Bigshrimpin 08-13-2004 04:21 PM

Re: Factory Installed Bracket?
 
it's a gill bracket . . . not sure if those were factory with tracker . . .

Bigshrimpin 08-13-2004 04:22 PM

Re: Factory Installed Bracket?
 
What's with the wood wedges on the fender of the trailer?

John R 08-13-2004 04:39 PM

Re: Factory Installed Bracket?
 
Yep - all of the above - Mako Console & original style and I've read, often splitting, Gill bracket. Looks like it offers 6 pounds of floatation [img]/images/graemlins/tongue.gif[/img] But it is on Nantucket - is that where you are?

Fr. Frank 08-13-2004 05:19 PM

Re: Factory Installed Bracket?
 
Tell the broker he is mistaken. It is an I/O conversion. GIL marine was exclusively aftermarket back in '87.
However, in 1988-90, the GIL bracket was offered as a factory install on the 6 of the 34' Wellcraft Scarab "Raider", a boat that was available only to law enforcement agencies and the military.
I rigged 4 of them.

Capt Chuck 08-13-2004 07:05 PM

Re: Factory Installed Bracket?
 
It's not a CSY manufactured Hull either http://www.click-smilies.de/sammlung...smiley-037.gif

warthog5 08-14-2004 09:01 PM

Re: Factory Installed Bracket?
 
Those old Gill brackets were made of steel and they liked to rust from the inside out. Gill doesn't even make that style any more.
Not much get's by you guy's. Good eye.
I'm guessing on the wood wedge blocks. Maybe a roller broke.

jfm 08-15-2004 07:47 AM

Re: Factory Installed Bracket?
 
It looks like someone just set the wooden wedges up on the trailer fender. Probably used as chocks for the tires.


All times are GMT -4. The time now is 01:42 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft