Transom work for 20' sceptre .
 

I'm ready to do fix my boat, I bought this in really bad condition. But the transom I belived need to get replace. My question is "HOW" and this sea cratf came with a 302 ford engine. How bad is this? I took the engine out to re-built it. I take any tips help money what ever :(

thanks

Re: Transom work for 20' sceptre .
 

You came to the right place, just do a search and you will find the answer, its all been done and you'll get good ideas also. Good luck.

Re: Transom work for 20' sceptre .
 

Us too...

Re: Transom work for 20' sceptre .
 

Otto,

...and hear I've been budgeting 1 case for the repair crew for every beer that is guilty of "contributory negligence"!!!! What's your secret, man?

Re: Transom work for 20' sceptre .
 

Hey SeaCrafters! I'm in the midst of replacing the transom of my '74 20ftcc. I've cut out the rot and preped the remaining glass to accept the 2 pieces of 3/4" marine ply I'll be laminating with West System 205&105. My Questions: 1. Do I fill all gaps between hull interior and ply with epoxy with or with out filler & fibers? 2. Should I stretch the fiber sheet over and around the outside of the hull? 3. if so, how far over the exterior? 4. How much should I flare out the seam between hull and transom, will that effect how the boat planes? Any thoughts?

Re: Transom work for 20' sceptre .
 

Can we see some pictures.....

Re: Transom work for 20' sceptre .
 

Greetings! I actually got some advice from a friend. I'll post some pictures of the project for review soon. Thanks!