350HP crusader in a 23 inboard.......
 

would anybody know the cruise numbers on a rig like this ? boat is a 23 inboard with a 350HP crusader . thanks

Re: 350HP crusader in a 23 inboard.......
 

Just curious and to clarify; is that a 350 HP or Cubic Inch?
Would also depend on prop dia. and pitch.

Re: 350HP crusader in a 23 inboard.......
 

i get 24knots at 2700rpm 29 knots at 3200rpm

Re: 350HP crusader in a 23 inboard.......
 

Probably both Cu in and HP....

Re: 350HP crusader in a 23 inboard.......
 

Nexgen is your boat an IO not an inboard, I have never heard numbers anywhere close to yours?

I get a 20-22 knot cruise at 3200-3400 running the same power package. This is with a large T-Top and a good amount of fuel.

Re: 350HP crusader in a 23 inboard.......
 

thanks for the replys everybody...yes it is 350ci 350HP straight inboard. riprunner whats your fuel burn at that speed ? i fugured it would be a little quicker with this package

Re: 350HP crusader in a 23 inboard.......
 

my boat is an inboard 350ci 350 hp 17" wheel

Re: 350HP crusader in a 23 inboard.......
 

I was hoping it would be quicker too, it's really the only negative I have with the boat. I started with a 15x17 wheel and based on suggestions here and original specs moved to a 16x17 wheel and a got the same exact numbers with a little bit more vibration. At that speed I burn about 10-10.5 GPH on the smartcraft gauge. My numbers are pretty close to everyone else with inboards that I have talked with even though I push more HP than most. I also have a very tall hard T-Top with enclosure and usually run the boat heavy on fuel so that does effect my numbers slightly.

Nexgen, do you have a t-top, bottom paint etc...? What are you doing to get those fantastic numbers?

Re: 350HP crusader in a 23 inboard.......
 

sorry my prop is 16x19 it a sceptre i get on average 10 gal an hour yes it has bottom paint. thoose numbers are with people and some fuel too.

Re: 350HP crusader in a 23 inboard.......
 

interesting . i can live with your #s..lol are you sure they are in knots and not mph ? anyway i have seen big diffrences in 2 inches of pitch . 350HP is a lot of HP for a 23 footer i would say . thought for sure it would get routinely 23+ on a cruise around 3100rpms