Classic SeaCraft Community - Removing Stern Cleat

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)

- - Removing Stern Cleat (http://www.classicseacraft.com/community/showthread.php?t=20272)

Splitseas

04-27-2009 10:43 AM

Removing Stern Cleat

Guys,

I'm having trouble getting to the washers and nuts under the port side stern cleat on my 20' CC. I'm trying to replace the cleat. This is the one on the same side as the livewell, so you can't access. Does anyone have any suggestions on how to get in there to get a wrench on the nut? Thanks.
:D

eggsuckindog

04-27-2009 12:59 PM

Re: Removing Stern Cleat

Maybe use toggles - I have a Master Angler and haven't figured out how to at anything in the corner

datngrizz

04-27-2009 01:05 PM

Re: Removing Stern Cleat

How about drill out the bolt from the topside. The nut will drop down. Replace with a toggle. May work...

mnwnvc

04-27-2009 04:46 PM

Re: Removing Stern Cleat

Drilling works fine until the nut, washer and bolt start to spin. Now you have the same problem and an ugly bolt head. You could cut the cleat and bolts with a sawzall but I do not have a good solution for replacement.

ROBCAR

04-28-2009 08:38 AM

Re: Removing Stern Cleat

I drill an small access hole with a hatch (about 4") ... figured that would be the best way to get to the nuts and washers.

eggsuckindog

04-28-2009 01:40 PM

Re: Removing Stern Cleat

Quote:

I drill an small access hole with a hatch (about 4") ... figured that would be the best way to get to the nuts and washers.

Inside the baitwell? that just gave me an idea to get at the stern ring that drips rust on mine - of course the one with no access issues doesn't do it :D

All times are GMT -4. The time now is 01:22 PM.