Best way to seal bracket holes thru transom?
 

I just dry fit a new bracket and plan on taking it back off to seal/sleeve all of the mounting holes. What do you guys think is the best technique and/or material for doing this job?

Thanks!!!

Re: Best way to seal bracket holes thru transom?
 

Where's Don when you need him
I believe 5200 for sealing holes and mounting bracket...again I believe..or was it 4200?!
-Fred

Re: Best way to seal bracket holes thru transom?
 

I believe this is the best method.
http://bertram31.com/proj/tips/sleeving.htm

Re: Best way to seal bracket holes thru transom?
 

- Oversize drill needed holes, fill with epoxy.
- Drill through center of the filled, cured epoxy hole w/ correct size bit for bolt(s).
- Install/seal with polysulfide.
- Don't look back.

Good luck...