Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   General (http://www.classicseacraft.com/community/forumdisplay.php?f=4)
-   -   Trailer question for 23CC, need a measurement pls (http://www.classicseacraft.com/community/showthread.php?t=22063)

shine 10-05-2010 03:53 PM

Trailer question for 23CC, need a measurement pls
 
I am locating a trailer to use to pick up a 23CC. I could really use a couple quick measurements from someone who has a 23CC. I want to see if I need to modify trailer before picking up boat.

Vertical distance from top of rollers to top of bunks, and distance of bunks from the center line of trailer (or distance between the two bunks will work too)

Thanks!

Old'sCool 10-06-2010 08:07 AM

Re: Trailer question for 23CC, need a measurement pls
 
I can get it this afternoon. You want the rollers between the bunks??

shine 10-06-2010 11:06 AM

Re: Trailer question for 23CC, need a measurement pls
 
yes please, the vertical disstance from roller (on the ceterline) to the top of bunks.

Also, distance between bunk (inside side of bunk to inside side of bunk)

I can use those to determine if the bunks on the trailer need to be raised before I go pick up the 23.

THANK YOU !!

Old'sCool 10-06-2010 04:00 PM

Re: Trailer question for 23CC, need a measurement pls
 
Bunks ~ 32 1/2" inside to inside
keel rollers are ~ 9" below top of bunks in center of roller. My bunk tops are beveled to fit hull taper.

shine 10-06-2010 05:26 PM

Re: Trailer question for 23CC, need a measurement pls
 
THANK YOU !!!!


All times are GMT -4. The time now is 09:03 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft