Classic SeaCraft Community - 20 Master Angler Gunnel Supports

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)

- - 20 Master Angler Gunnel Supports (http://www.classicseacraft.com/community/showthread.php?t=24704)

tunacious

11-06-2012 08:38 PM

20 Master Angler Gunnel Supports

I'm planning on putting new gunnel supports/rod holders in the MA I've been working on. My question is, should I cut the supports so they fit flush with the outer hull or should I leave a gap? If flush, should they be epoxied to the outer hull. Not sure if the hull flexes to much for the joint to hold. I have searched for pics and it seems that some MA do not have visible supports and some do.

everybody

11-06-2012 10:39 PM

1 Attachment(s)

I did as your thinking. It gave the gunnels alot of support.

tunacious

11-09-2012 09:30 AM

Thanks, can you post a better pic? It looks like you boxed yours in. Do you have rod storage under the gunnells

kendalhelms

11-14-2012 03:08 AM

No no don't cut I guess you should leave a gap it will better rather than cutting the support.

eggsuckindog

11-14-2012 09:34 PM

the outter hull I think would flex too much, I want to put some in but would leave a gap and attach top and bottom - I walk on mine as is

All times are GMT -4. The time now is 05:08 AM.