![]() |
Transom/composite foam, honeycomb panels
We are now stocking transom composite material as well as pre-laminated honeycomb panels.
Transom boards are 3/4" thick, 26 lb density with fiberglass roving reinforcement. General purpose FRP reinforced boards in 1/2" for decks, gunnels, stringers, etc. http://http://www.gulfstreamcomposit...gory-s/136.htm Fiberglass honeycomb panels are 25mm (bit over 1") and come pre-laminated with 17 oz of glass on each face. Ideal for decks/soles or frames. http:// http://www.gulfstreamcomposi...gory-s/137.htm Prices are better than anywhere else. Available for pickup or we can ship by freight. Joel |
[QUOTE=shine;236806]We are now stocking transom composite material as well as pre-laminated honeycomb panels.
Transom boards are 3/4" thick, 26 lb density with fiberglass roving reinforcement. General purpose FRP reinforced boards in 1/2" for decks, gunnels, stringers, etc. http://http://www.gulfstreamcomposit...gory-s/136.htm Fiberglass honeycomb panels are 25mm (bit over 1") and come pre-laminated with 17 oz of glass on each face. Ideal for decks/soles or frames. http:// http://www.gulfstreamcomposi...gory-s/137.htm Prices are better than anywhere else. Available for pickup or we can ship by freight. Joel[/QUOTE Hey Joel, Congrats on the expansion of your line. I will be wanting some pre preg for a rear vertical panel. Non structural. 2`x7` maybe? Cheers, GFS |
Im sorry, but I dont have a good supplier for pre-pregs
|
Is there a minimum order on the sheets of foam?
|
No minimum order on core materials, but freight is the same for 1 or 10 sheets.
|
1 Attachment(s)
Quote:
Attachment 10604 |
Quote:
if over 100 pounds (more than a couple sheets) $175 if we need a liftgate on your end (if no forklift) the honeycomb panels dont ad much weight at all |
Quote:
|
All times are GMT -4. The time now is 07:14 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft