Hi Red 20
I really don’t know which isle they were on but they were about 2 or 3 isle’s from the most northern isle at the flee market. They sold a lot of different new E-tech products mostly for marine metal fabrication shops. They must be a distributor for E-tech and have first shot on extra new stock that has not been picked up or over stock items.
Reelescape1
The dementions are
2 ½” high that’s the part that is above the 90 degree lip of the boat. There is a screw part that fits under the lip.
The outside demention is 1 ¼”
The hole that the pipe runes through is 1 1/16”
The aluminum pipe size is ¾” pipe is measured by its inside demention
The aluminum pipe outside demention is just over 1”
The pipe catalog id is 6063 T5 Sch 40
This is the same bow rail that SeaCraft, Contender and a lot of other OEM’s use on their boats and is much better that the original equipment SeaCraft used 30 years ago.
FellowShip
………………………….
Just for the Grins
Official Antique Classic SeaCraft Owner