E-Tech Score

[FELLOW-SHIP]

Hi Red 20

I really don’t know which isle they were on but they were about 2 or 3 isle’s from the most northern isle at the flee market. They sold a lot of different new E-tech products mostly for marine metal fabrication shops. They must be a distributor for E-tech and have first shot on extra new stock that has not been picked up or over stock items.

Reelescape1

The dementions are
2 ½” high that’s the part that is above the 90 degree lip of the boat. There is a screw part that fits under the lip.
The outside demention is 1 ¼”
The hole that the pipe runes through is 1 1/16”
The aluminum pipe size is ¾” pipe is measured by its inside demention
The aluminum pipe outside demention is just over 1”
The pipe catalog id is 6063 T5 Sch 40
This is the same bow rail that SeaCraft, Contender and a lot of other OEM’s use on their boats and is much better that the original equipment SeaCraft used 30 years ago.

FellowShip

………………………….

Just for the Grins

Official Antique Classic SeaCraft Owner

[red20]

I bought some stuff from them too but didn't see those - Maybe next time. Sure could have used them on my boat. I wonder if they are local and sell them as scratch & dents?

[FELLOW-SHIP]

Hi Red20:

E-Tech in up the road approx 100 miles, I don’t know the guys that had the booth. They had a box of these fittings and I got approx ½ of them. If you go to their web sight they have a catalog and phone # for retail buyers or maybe they know who worked the Marine Flee Market.
The guy said they were over stock items that someone did not take or they got back. Nothing I got looked scratched or damaged in any way. I worked for Bennett Marine and we were very fussy on that it seemed to me that all the stock on the booth looked new and undamaged just like the Taco booth, Tigress booth, and the Lenco Trim tab booths. I was there Friday during the day and it looked like the first one that spotted the fittings.


FellowShip

………………………….

Just for the Grins

Official Antique Classic SeaCraft Owner