Sending unit installation??

[Ed]

Hi gents-

my sending unit crapped out. I first checked to see if it was the fuel gauge by disconnecting both wires at the tank, crossing them, and then turning on ignition. My gauge and one of John R's spare gauges...both went past the full mark...which as I understand means that the gauge(s) are good and the sending unit is bad.

My question to you...is there anything special I need to know about installing a new sending unit. To me, it looks like I disconnect the two wires, unscrew 5 hex bolts, remove unit & gasket, and replace with new unit & gasket, and reconnect wires. Anything else? Also...any idea as to how much a sending unit costs??

As always, thanks in advance.

JOHN R- Do you want me to send you that fuel gauge back? If so, let me know your address so I can drop it in the mail. Thanks!