![]() |
#1
|
|||
|
|||
![]()
I am going to Florida later this week, and I left my boat down at the shore. I forgot to mention the length and width of the hatch to the dry storage box on my 1978 23 SF SeaCraft.
Does anyone know the size? i am asking becuae I plan to stop by Marine Connection Liquidators. Any input would be appreciated. Thanks, Peter
__________________
http://i113.photobucket.com/albums/n...iseacraft3.jpg |
#2
|
||||
|
||||
![]()
What hatch are you referring too Peter? I can measure mine for you.
![]()
__________________
![]() ![]() 1978 23' Superfish/Potter Bracket 250HP -------- as "Americans" you have the right to ...... "LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck |
#3
|
|||
|
|||
![]()
Capt. Chuck,
You are the best. The hatch right in front of the console (not the one up on the platform). It's the one with two hatch covers and the drain in the bottom. Thanks, Peter
__________________
http://i113.photobucket.com/albums/n...iseacraft3.jpg |
#4
|
||||
|
||||
![]()
Ok, the floor hold in front of the console. Mine only has 1 hatch lid.
fore to aft = 37 3/4" port to strb = 30 3/8" center depth = 18"
__________________
![]() ![]() 1978 23' Superfish/Potter Bracket 250HP -------- as "Americans" you have the right to ...... "LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck |
#5
|
|||
|
|||
![]()
I didn’t know there was any “Dry Storage” on my 23’ for me it is just varying degrees of wet storage locations.
FellowShip _______________________________________________ My motto: Just for the Grins ![]() |
#6
|
|||
|
|||
![]()
Point noted. I am calling it dry storage because that is what it is referred to in the SeaCraft spec's (listed on this web site)
__________________
http://i113.photobucket.com/albums/n...iseacraft3.jpg |
![]() |
|
|