Seadek Coaming Bolsters

[castnetcracker]

I'm looking to install Seadek coaming bolsters on my 23 SF and have a few questions for anyone who may have some experience.

is the material flexible enough to bend along the slight curve (if any) of the cap that i can order straight rectangular pieces? the lead time should be a lot less if this is the case.

i called seadek to see if they already had a 23 sf templated, but they only had a 25 in their computer. as far as i can tell those should be exactly the same from the aft corners forward but not really sure . i know i could have an installer template it from scratch but i want to get them installed ASAP.

[uncleboo]

Yes they will follow a contour. I, briefly, sold the deck material and it is very flexible. The coaming pads are a thin backing same as the deck material with the softer stuff outside. I WILL be getting some for my 18.

[thehermit]

would love to see finished look if you do it.

[DonV]

Really??? They don't have the Potter 23' template ready to go? Strange!

[Skiblet]

They should have a template. I had them use my boat as the template back in 2007. They keep thinking it's a 25 due to my bracket.
After 12 years the bolsters are still in decent shape.

[Bikecop1]

Pictures?