Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 09-11-2019, 09:51 PM
captsuperfly captsuperfly is offline
Recovered
 
Join Date: Aug 2019
Posts: 74
Default sceptre to CC conversion - bow toe kick

I'm still planning a full stringers up rehab on a 79 Sceptre that I'm planning on converting to a CC.

I have a builder with a mold for a cap. My plan was to keep the liner in the boat, but am curious if anybody has done this and can comment on a difference in Toe kick under the gunwale at the bow. The Sceptre/Savage liner seems to have a shelf under the front gunwale that causes the liner to project further into the cockpit than the regular CC liner?

I've attached a picture of a boat I found online that had the same liner and appears to be a similar conversion.

I'm worried that that liner will put my feet way in back of me if I dig in on that front gunwale. I fish in rips often and need the toe kick.

Thanks for any advice!
Mike
Attached Images
 
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:56 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft