vaccum pump size and type

CJR · #1 03-24-2005, 10:13 AM

I am considering vaccum bagging some hatch covers, but I am unsure about the size,type, etc. of the pump to use. Any assistance in this will be appreciated.

warthog5 · #2 03-25-2005, 11:03 AM

You will want a pump that can move about 4 1/2cuft of air for what your doing. The max hgin is not as important. You don't really want to pull down over 15hgin.

There are a lot of pump's that will pull down to 29hgin available out there. The problem is that they will not handle a lot of volume. You need one to pull at least 4 1/2 cuft of volume to make up for any leak's in the bag.

I suggest a port like this one.

Briguy · #3 04-01-2005, 12:46 AM

I bought one of those "vacuum pump" thingees out of the back of Hustler magazeen a few years back. The only problem was figuring out how to get the resin off my weenie without burning. [img]/images/graemlins/wink.gif[/img] [img]/images/graemlins/wink.gif[/img] [img]/images/graemlins/wink.gif[/img]

ocuyler · #4 04-01-2005, 02:30 AM

Ezactly!

Mark · #5 04-01-2005, 05:40 PM

WAY more info than I needed [img]/images/graemlins/blush.gif[/img]