1988 seacraft/ tracker 20cc information needed!

wingnut · #1 07-21-2007, 03:53 PM

hey guys, im new here.. i just picked up a 1988 20cc seacraft tracker. its the SIC serial #. im just curious to know if this is a boat i should fix and get rid of, or keep? i know its not a potter boat but im not sure if its a well built boat or not?

thanks,
scott

zipp45 · #2 07-22-2007, 09:49 PM

I had an 89 and wish I never got rid of it really nice boat

wingnut · #3 07-27-2007, 01:15 AM

i should have the boat in the water next weekend, i just had to clean (powerwash) the whole boat, rebuild the carbs and ditch all the nonsence on the merc thats un-needed.

ive herd of problems with the scuppers, that when there are people in the back of the boat it will actually wash water into the cockpit area.. is this true?

thanks again

JohnB · #4 07-27-2007, 07:06 AM

just put plugs in or better yet, get the Rabud scupper covers that have the balls in them that keep water from flowing back in. That is a SeaCraft standard upgrade.

Vamanos · #5 07-31-2007, 09:11 PM

John,

Do you have a source for those scupper covers. I need some.

Thanks,
Greg

JohnB · #6 07-31-2007, 09:24 PM

Here is a link and picture.
http://www.rabud.com/SeaScupper_Thru...s_Release2.htm
I think I got mine at west marine, but I don't remember. I have had them for a couple of years, with no problems. One thing I did do, was to put stainless screen on the front of the drains to keep crud from clogging them up.

NoBones · #7 07-31-2007, 10:48 PM

Make sure when you get them they are Rabud, there are cheaper versions out there. Mine are below the water line and still get the water out even after a heavy rain at the dock... My 20SF just spent 10 days in the water in the Keys.
I should say above the water

THEY WORK!!!
See ya, Ken