|
|
|
|
#1
02-09-2009, 07:07 PM
|
|||
|
|||
20 MA/ Bracket/ 20 inch Shaft
I am considering bringing my 1979 20 MA (without raised floor or trim tabs) down to Hermco for a transom enclosure, livewell and bracket. Is it not possible to use a 20" shaft (1999 Johnson 175, with 140 original hours) for this application? I do not want to repower, but if this is just not possible, I need to know sooner than later.
If true, then I will be selling a 2008 Yamaha F60 NIC, and mounting the V-6 175, and hydarulic jack plate to my 1988 Boston Whaler Sport 15. I know that this may sound NUTS but there is a method to my madness. Any thoughts appreciated. Thanks. Part II. 
|
|
#3
02-09-2009, 08:35 PM
|
|||
|
|||
|
Re: 20 MA/ Bracket/ 20 inch Shaft
Don't know the answer but here's a $500-600 "plan B" in the case 25" is required on the bracket:
http://www.baymfg.com/Bombardier.asp Sure wish I could take my rig to Hermco.
__________________
there's no such thing as normal anymore...
|
 |
|
|
Hybrid Mode
