starting my 1972 20' seacfrat

dandub20 · #1 02-15-2012, 09:56 AM

i am starting my first seacraft. I have no experience and am planning to tackel most myselfe. Mainly prep work. I will have pictures soon and am open for advice.

DonV · #2 02-15-2012, 06:34 PM

"Another one bites the dust, another one bites the dust"

Ahhhh.....the SeaCraft addiction has hooked another one!! Good luck!!!

dandub20 · #3 02-16-2012, 09:36 AM

thank you, i need all i can get.

dandub20 · #4 02-16-2012, 09:37 AM

the cobia are starting to show up and is slowing down my project

dandub20 · #5 02-17-2012, 12:16 PM

here are some pics

dandub20 · #6 02-17-2012, 12:25 PM

not sure how to free gunnel cap from transom. is it okay to cut it??

dandub20 · #7 02-17-2012, 12:28 PM

here are some more pictures

dandub20 · #8 02-17-2012, 12:33 PM

i'm thinking of cutting the remaining 2 inches of floor and install the new floor before i put gunnel cap back on, then 5200 the gunnel cap to floor

Old'sCool · #9 02-17-2012, 01:43 PM

You should plan on several days of reading the repair section here. Lots of good stuff

dandub20 · #10 03-07-2012, 04:58 PM

does anyone know if i should cut out my boxes on the transom to help free up the gunnel cap?? thinking of closing in transom.