Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Performance
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 09-29-2011, 07:08 PM
gofastsandman gofastsandman is offline
Senior Member
 
Join Date: Mar 2007
Location: W.P.B. ,Fl.
Posts: 4,586
Default

Get new o rings for the t stat covers also liberal use of vaseline on the threads and o rings as they can leak and corrode the sparky plugy thingies.

Salt comes out of suspension at 160 deg so you may have some cooling passage blockage. Check that. The motah will run rich w/o stats so decarb the motah as well. My `96 150 runs at 147.

Harbor Freight has infra red temp guns for really short money. Shoot each cylinder on the muffs. Don`t turn the hose on more than half flow or so. Over 45psi or so is a no no.

Change out all lines from the tank to the motah. New Racor and bulb too. Avoid E 10 like the plague.

Use only Champion QL series plugs. I don`t like it either. Your electronics will thank you though.

Some folks seem to like the Pennzoil semi synth. 15 clams @ wally. I also pre mix, but that`s up to you.

Cheers,
GFS
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft